Super Blazing Sabot update!

Super Blazing Sabot update!

Postby BlazingSabots » Sat Oct 04, 2014 12:26 pm

Greetings, Tips of the day, before you venture out with your gun:

1. Watch out for scope bases or rings that have the tendency of getting loose!
2. Use loads that you are comfortable shooting without flinching, practice till you are comfortable and can constantly hit where you aim.
If you find yourself getting smacked and are not comfortable using, its high time you switch over to another load that you are comfortable shooting!
3. When using a Auto-loader or pump gun tighten the barrel lug nut all the way and then back off only one notch to relieve excess pressure now be sure to check your point of impact before you go out hunting.
4. Take your time, don't rush, make your first shot count!

** Just want to update you about Super Blazing Sabots progress, we have authorized further changes to the design and re-doing the molds, the newer design and blend samples will be soon in my hands and I'll send out samples kits to the ones who had registered with us in the past in about 3 to 4 weeks time!

Sorry for the delay.

Best regards,
Ajay Madan
Super Blazing Sabots
BlazingSabots@Gmail.com
http://www.facebook.com/BlazingSabots?ref=hl[/url]
http://slugshooting.accountsupport.com/[/url] ... wforum.php
http://castboolits.gunloads.com/showthr[/url] ... ot!/page1
view...f=118&t=196961[/url]
posting.php?mode=reply&f=118&t=196961
http://www.deeranddeerhunting.com/fo...p?f=43&t=39246[/url]
http://www.go2gbo.com/forums/slug-gu...old-is-gold-!/[/url]
-Elite Group of Slug Shooter's
We all, who take slug loading seriously are a dedicated family, who have taken it upon ourselves to perfect our tech. We experiment to find better techniques and share our knowledge.
Location: New Jersey. USA / Frankfort, W.Germany / London, UK
-Elite Group of Slug Shooter's
We all, who take slug loading seriously are a dedicated family, who have taken it upon ourselves to perfect our tech. We experiment to find better techniques and share our knowledge.

"All for one, one for all "
User avatar
BlazingSabots
Site Admin
 
Posts: 225
Joined: Mon Jun 17, 2013 8:06 pm
Location: New Jersey. USA / Frankfort, W.Germany / London, UK

Re: Super Blazing Sabot update!

Postby oig » Sun Oct 11, 2015 5:22 pm

Hey Ajay,

So, what happened with the redesign? Didn't see a progress report?

Yep, it's me again, back in the saddle. :lol:
Slugshooting: Making a bigger impression than a .50 BMG! Join ASSA and Help Us Make Some Noise!
User avatar
oig
Site Admin
 
Posts: 21
Joined: Thu Aug 30, 2012 11:35 am
Location: People's Republic of Maryland

Re: Super Blazing Sabot update!

Postby BlazingSabots » Fri Sep 02, 2016 1:05 pm

The molds were ready but none of the different resin mix were good enough to withstand the high pressures, including
the PP, PE, HDPE, Delrin and Nylon-6.
We had three molds made and in the meantime they got rusted and pretty much no good.

The guy who makes Remington Sabots says its Mobil Resin and gave me the # but cant trust no one and spend thousands on hear say! !

I had sent you a private Email, please read it and let me know.

Thank you.

Kindest regards,
Ajay Madan

Super Blazing Sabots
-Elite Group of Slug Shooter's
We all, who take slug loading seriously are a dedicated family, who have taken it upon ourselves to perfect our tech. We experiment to find better techniques and share our knowledge.

"All for one, one for all "
User avatar
BlazingSabots
Site Admin
 
Posts: 225
Joined: Mon Jun 17, 2013 8:06 pm
Location: New Jersey. USA / Frankfort, W.Germany / London, UK


Return to Blazing Sabots

Who is online

Users browsing this forum: No registered users and 1 guest

cron